SRP521W 3G failover with Option iCon322 not working
Using a Option iCON322 modem the 3G backup connection is not connecting after removing Ethernet WAN. The exact same configuration (using the same 3G SIM) is working using a Sierra Wireless Compass 885 modem.
- all factory default expect:
-- 3G Modem config
-- Failover & Recovery Validation Custom address
- Main WAN via a Cablemodem connection (DHCP)
- SRP521W FW 1.01.24 (003) HW 3.0.0
- Option iCON322 FW 4.4.0
- 3G provider: Orange Switzerland
- Configure the SRP
- Reboot SRP without Ethernet WAN connection
- The 3G backup link connects as expected
- Plug in Ethernet WAN
- Fallback to Ethernet WAN as expected
- Disconnect Ethernet WAN
- The 3G connection no longer connects, tries to connect but always fails
(exact same procedure using a Sierra Wireless Compass 885 3G modem does work ok)
QuestionDear All,I'm currently looking for firmware version 22.214.171.124 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 126.96.36.199 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...