03-21-2013 07:46 AM
hi guys,
I use a pretty simple configuration
1 cisco SRP521W
* WAN DHCP
* LAN in a /28
* wireless disabled
* GRE tunnel enabling the access to a /11 network while sharing the local /28
I configured a first router successfully : 10.xx.xx.0/28 , lan ip 10.xx.xx.1 rest afftected as dhcp... and when connecting on the lan i get an IP and can ping the remote network
I tried to replicate the conf on the following routers for different sites
10.xx.xx.16/28 with lan 10.xx.xx.17 and so
but while on the router through the interface the ping through the gre tunnel works ok , on the lan side nothing it just times out...
i'm a bit at a loss so any hint would be apreciated !
Alex
03-21-2013 08:19 AM
WEIRDER !
if i uncheck the "enable" checkbox on the vpn configuration, the route disappears from the table... but it WORKS from the lan!?!?!
BUT I cannot ping the LAN from the other side of the GRE tunnel....
03-21-2013 04:09 PM
Hi Alexander,
Did you see the following:
https://supportforums.cisco.com/docs/DOC-23028
Not sure about your second observation - that doesn't sounds right.
Andy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: