04-18-2013 07:02 PM
Hi,
I upgraded the firmware to latest and apparently i've lost couple of options inlcuding TCP Dump in diagnostic as well as I cannot find how to disable/enable an ethernet port. Can someone please help on this ?
04-18-2013 10:20 PM
Hi,
Which version have you installed? None of the features should have been removed.
Are you logged in with the administrator role?
Regards,
Andy
04-18-2013 10:23 PM
Hi Andy,
I downloaded the latest one last night - here's some more details:
Model: | SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXO |
Version ID: | V01 |
Hardware Version: | 4.1.0 |
Boot Version: | 1.1.22 (Feb 22 2011 - 09:42:55) |
Firmware Version: | 1.01.27 (007) Jun 15 2012 |
ADSL Firmware Version: | 0.75.0 |
Recovery Firmware: | 1.01.20 (011) |
Setup Wizard Version: | 20101106.00 |
WAN MAC Address: | 20:37:06:3B:C7:54 |
Current Time: | Fri, 19 Apr 2013 15:22:41 |
WAN: | WAN1 (1 PVC Enabled) |
LAN: | VID (2 VLAN Enabled) |
Wireless: | 1 SSID Enabled |
Edit: I've found a URL as well which refers to the same option but I have only fewer options in Diagnostics now.
Here is what I'm getting now:
04-18-2013 11:44 PM
Hi,
It looks like you have downgraded your SRP527W-U-K9 product to the 1.1.x firmware release, which does not include those features.
Please install the latest 1.2.x release and you should see those features again.
Regards,
Andy
04-18-2013 11:49 PM
Hi Andy,
How do I check if my device is U as the sticker and information just say SRP527W only.
04-19-2013 12:21 AM
What is the full product code from the sticker on the bottom of the device?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide