Ocassionally, i see that the wifi on the SRP Freezes. If i am connected via lan, i can still surf the net or connect to another access point on the network and surf. But the wiress devides connected to the SRP loose connectivity even though it shows that the wifi connection is connected.
I am running on the latest firmware. this problem has started occcuring only recently
There are a few questions that need to be answered before we can start looking for a cause, and I am assuming that when you refer to connected via lan you mean by wired connection.
Has anything recently changed/added/moved on the network such as adding an Access Point or other wireless device? How ofter do you notice this issue occurring?
When you loose ability to browse but you still show connected to the SRP's SSID can you ping the SRP's LAN IP address. Can you ping a public IP address such as 220.127.116.11. Can you ping by name, such as google.com?
Do all devices have this issue with the SRP or are there some that have no Issues? What are the Operating systems/Device Type?
What encryption and Channel are you using on the SRP?
Also, What are you doing to remedy the issue when it is occurring?
There are a lot of things that need to be looked at and It may be quicker and easier to give us a call at 1-866-606-1866 so that we can open a service request for you and get this resolved.
I have a similar issue with my router too. I find that once I exceed 8 wireless clients the router disconnects all clients and behaves erratically by connecting and reconnecting clients every 5-10 seconds until I reboot the router manually. I find the router is infact responding to other functions, such as accessing servers in my LAN from the internet.
I have 2 ipads, 3 iphones, 1 desktop, 1 printer and 3 laptops in my household.
SRP547W, ADSL2+ AnnexA, 802.11n ETSI, 4FXS/1FXO
1.1.19 (Aug 24 2010 - 20:50:42)
1.2.4 (003) Jan 11 2012
ADSL Firmware Version:
WAN MAC Address:
Tue, 22 May 2012 18:17:37
WAN1 (2 PVC Enabled)
VID (3 VLAN Enabled)
2 SSID Enabled
Standard - 20MHz Channel
13 - 2.472GHZ
I am the only Channel 13 AP in my area too. I am using WPA2 AES encryption.
Is there a limitation of this hardware to only support 8 clients? I guess only 1 or 2 devices is every doing a great deal on the wifi, other times its idling.
I've started facing this again. The wifi network dissapears on and off and it comes back in a while. The LAN work ok What I hv also noticed is that the Internet connection drops periodically. I have a fast broad band but ocassionaly it hangs even when connected via LAN. I hv a Vodafone suresignal and that's not working well because of this. It's a feature packed device but it seems a bit flaky to me. I have the latest firmware on it now But the problem persists
Small businesses are facing the realities of the new normal and wondering what are the best ways to monitor, protect, manage and grow. Cisco understands the unique needs of small businesses and is committed to help overcome their top IT challenges. The fi...
What does the new normal mean for small business? Join this CiscoChat to learn how Cisco Designed, the portfolio curated for small business, can help small businesses adapt and thrive through the new normal and beyond.
We'll take your questions live...
Hi, i have an RV130W Wireless VPN router on which contrary to all advertisements i do not have gigabit LAN.The port links state 1000 full duplex however any LAN transfer is capped at about 20MBps, primarily because the router CPU reaches 100%. So this giv...
Join us in an exclusive Cisco Customer Connection briefing for a demonstration on the management capabilities within the Cisco Business Wireless product line for small businesses. For the lone-IT-superman, it is critical that the network products are easy...
This may be a simple question so I hope someone can help. We have several Cisco SG300\500 switches in L2 mode. Each switch has 8 VLANS and VLAN 1 is still native (For now). We do all routing between VLAN's on our firewall. After reading several ...