cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
887
Views
10
Helpful
2
Replies

Timeout of NAT session on many cisco routers

louis.marie
Level 1
Level 1
Hello, I have a customer who has a Siemens C470IP behind a Cisco RV320 Customer IP : 95.182.yyy.xxx SIP serveur : 91.121.129.20 (sip.ovh.be) How it works : - the sip account register on our sip server : 95.182.yyy.xxx:5060 --- REGISTER ----> 91.121.129.20:5962 We send keepalive each minute to keep the translation of the port 5060 to the sip equipement. 91.121.129.20:5962 ---- OPTIONS (keepalive) ----> 95.182.yyy.xxx:5060 We can see that, after a REGISTER the next OPTIONS request get an answer (200 OK) and the other requeste don't get answer. when we send a call to the customer, this one doen't answer on our INVITE request it seems that there is no more translation between the port 5060 with the equipement on the local network. We got the same problem with zyxell router. We have to upgrade UDP Sesison ( cf : http://ovh.to/c165iMV ) How to do the same with RV320 or RV042 ? Best regards, Louis
2 Replies 2

Laurent Galais
Cisco Employee
Cisco Employee

This should be a solution:

Linksys/Cisco – RV042 (firmware 1.3.12.6, 1.3.12.19)
1. Go to the router’s web interface (usually at http://192.168.0.1).
2. Login using admin as username and password.
3. Navigate to http://<IP_ADDRESS_OF_ROUTER>/f_general_hidden.htm.
4. Set UDP Timeout to 300.
5. Set SIP ALG to Disabled.
6. Click Save.

How can you set the UDP timeout on an RV320 dual wan router?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: