cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

3700
Views
1
Helpful
3
Replies
Highlighted
Beginner

two RV042 [Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE

hi, guys thanks for time and help i need a guide for configure this crap of routers

SITE A Static WAN IP X.X.X.X to 10.0.0.7 ipsec/vpn ports 

SITE B Dinamyc IP Address DynDNS

 

1 - First the Remote branch office RV042 when i enable the DynDNS services is updating the host whit the internal ip of the router

example 10.0.0.13

 

2 - Second the vpn only work when is set the ip addres of the remote office in the main office and not whit the domain name i get this error:

Aggressive mode Enable:

Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE 

 

Aggressive mode Disable:

Jan 1 05:41:41 2010VPN Log(g2gips0)[4] 186.6.29.68:2231: [Tunnel Disconnected] instance with peer 186.6.29.68 {isakmp=#0/ipsec=#0}
Jan 1 05:41:41 2010VPN Logpacket from 186.6.29.68:2231: [Tunnel Authorize Fail] 'g2gips0' forbids connection, cause: Aggressive Mode 

 

Configuration both sites 

SITE A:

WAN1

Local Group Setup:

IP ONLY

IP ADDRESS: 10.0.0.7(NAT)

Subnet

192.168.0.0

255.255.255.0

 

Remote Group Setup:

DYNAMIC IP + DOMAIN NAME FDQN AUTH

mysite.dyndns.org

Subnet

192.168.1.0

255.255.255.0

 

Aggressive Mode (Checked, unable to  disable or enable)

Keep-Alive Enable

Netbios Broadcast Enable

NAT-Traversal Enable

Deep Inspection Enable 

 

SITE B:

WAN1

Local Group Setup:

IP ONLY

IP ADDRESS: 10.0.0.13(NAT)

Subnet

192.168.1.0

255.255.255.0

 

Remote Group Setup:

IP: 196.3.81.44

mysite.dyndns.org

Subnet

192.168.0.0

255.255.255.0

 

Aggressive Mode (i can enable or disable)

Keep-Alive Enable

Netbio Broadcast Enable

NAT-Traversal Enable

Deep Inspection Enable 

 

Everyone's tags (1)
3 REPLIES 3
Beginner

it seems that in this place

it seems that in this place the staff respond when he feels like if a person enters a community and posts a question is because you need assistance
where is the staff or technical support?

buy 15 of these routers to 15 remote offices to vpn but I see that it is very difficult with these teams had I dreamed that these routers are so bad and with so little information and support have bought juniper

Rising star

Hi Arnaldo,For immediate help

Hi Arnaldo,

For immediate help, please contact the Cisco Small Business Support Center.  The contact information is located here: https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Regards,
Cindy

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!
Beginner

Thanks Cindy for your time

Thanks Cindy for your time and help!!!! 

to late in the weekend i change all RV042 for Juniper al vpn are up and working!

 

thanks take care!