two RV042 [Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE

[ARGJ]

hi, guys thanks for time and help i need a guide for configure this crap of routers

SITE A Static WAN IP X.X.X.X to 10.0.0.7 ipsec/vpn ports 

SITE B Dinamyc IP Address DynDNS

1 - First the Remote branch office RV042 when i enable the DynDNS services is updating the host whit the internal ip of the router

example 10.0.0.13

2 - Second the vpn only work when is set the ip addres of the remote office in the main office and not whit the domain name i get this error:

Aggressive mode Enable:

Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE 

Aggressive mode Disable:

Jan 1 05:41:41 2010	VPN Log	(g2gips0)[4] 186.6.29.68:2231: [Tunnel Disconnected] instance with peer 186.6.29.68 {isakmp=#0/ipsec=#0}
Jan 1 05:41:41 2010	VPN Log	packet from 186.6.29.68:2231: [Tunnel Authorize Fail] 'g2gips0' forbids connection, cause: Aggressive Mode

Configuration both sites 

SITE A:

WAN1

Local Group Setup:

IP ONLY

IP ADDRESS: 10.0.0.7(NAT)

Subnet

192.168.0.0

255.255.255.0

Remote Group Setup:

DYNAMIC IP + DOMAIN NAME FDQN AUTH

mysite.dyndns.org

Subnet

192.168.1.0

255.255.255.0

Aggressive Mode (Checked, unable to  disable or enable)

Keep-Alive Enable

Netbios Broadcast Enable

NAT-Traversal Enable

Deep Inspection Enable 

SITE B:

WAN1

Local Group Setup:

IP ONLY

IP ADDRESS: 10.0.0.13(NAT)

Subnet

192.168.1.0

255.255.255.0

Remote Group Setup:

IP: 196.3.81.44

mysite.dyndns.org

Subnet

192.168.0.0

255.255.255.0

Aggressive Mode (i can enable or disable)

Keep-Alive Enable

Netbio Broadcast Enable

NAT-Traversal Enable

Deep Inspection Enable 

[ARGJ]

it seems that in this place the staff respond when he feels like if a person enters a community and posts a question is because you need assistance
where is the staff or technical support?

buy 15 of these routers to 15 remote offices to vpn but I see that it is very difficult with these teams had I dreamed that these routers are so bad and with so little information and support have bought juniper

[cindy toy]

Hi Arnaldo,

For immediate help, please contact the Cisco Small Business Support Center.  The contact information is located here: https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Regards,
Cindy

[ARGJ]

Thanks Cindy for your time and help!!!! 

to late in the weekend i change all RV042 for Juniper al vpn are up and working!

thanks take care!