cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Get the latest Cisco news in this December issue of the Cisco Small Business Monthly Newsletter

748
Views
0
Helpful
2
Replies
Highlighted
Beginner

Using RV042 as Layer 3 Clear Gateway for Comcast EDI

Comcast installed a new fiber 10M EDI internet connection in our facility the other day and found out it is our responsibility to provide a layer 3 gateway to map the internet connection to the 14 public IP addresses they assigned to us.  We are using RV042 for our existing networks with a T1 we had.

Will the RV042 provide the gateway function to route the single IP address comcast provided to the 15 public IP addresses?  If so , can you provide the configuration example on this process?

Comcast EDI Connection ---> ???????? ----> 14 Static External Addresses

Interconnect Block 51.235.227.60 / 255.255.255.252.
Comcast Gateway is 51.235.227.61
Clear Layer 3 device WAN interface: 51.235.227.62

Usable IP Block 51.235.227.96/28
Mask: 255.255.255.240
Usable Addresses: 51.235.227.97 - 51.235.227.110

Thanks in advance for your help and advice.

Everyone's tags (3)
2 REPLIES 2
Rising star

Using RV042 as Layer 3 Clear Gateway for Comcast EDI

Hi Mr. Ken, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. Well Sr. in this case the RV042 will be no enough for your configuration because it is a Small Business device, I advise you to get an enterprise device to do this job.

You can get more information calling our Pre-sales department, see link bellow: http://www.cisco.com/web/siteassets/contacts/international.html?reloaded=true

I hope you find this answer useful,

*Please mark the question as Answered or rate it so other users can benefit from it"

Greetings,

Johnnatan Rodriguez Miranda.

Cisco Network Support Engineer.

“Please rate useful posts so other users can benefit from it” Greetings, Johnnatan Rodriguez Miranda. Cisco Network Support Engineer.
Contributor

Using RV042 as Layer 3 Clear Gateway for Comcast EDI

Maybe I'm misunderstanding something, but could this not be done using one-to-one NAT? 

Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com