cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
360
Views
0
Helpful
3
Replies

VPN Site To Site with two WRVS4400N

Muller Stephane
Level 1
Level 1

Hello I Try to make a VPN site to Site

I have a VPN connexion but , it is impossible to ping an ip address only the gate from the other site (192.168.1.77 from the network 1.18.0.0) or (1.18.0.77 from the network 192.168.1.0)

 

Thank you very much for your help

 

I use this setting for the PC

 

This is the configuration for the router A

 

This is the configuration for the router B

3 Replies 3

Mehdi Boukraa
Cisco Employee
Cisco Employee

Hi Muller, 

 

All configuration it looks fine and also you confirmed that you can ping the remote routers IP so the VPN is UP and there is a data through the VPN.

just for to confirm On the PC where connected to Network 192.168.1.0/24 he has Gateway 192.168.1.77 ?  

Can you confirm please if you disable firewall on both PC's ?

 

Please share your result after your test

 

Please rate this post or marked as answered to help other Cisco customers

Thanks

Mehdi

Hello :-)

On each PC the firewall is down and on cisco

Michael Vandergrift
Cisco Employee
Cisco Employee

You might want to try using private IP addressing on the LAN behind router B.  In spite of the local/remote interesting traffic selector in the VPN policy settings the router might still be trying to send the return traffic out to the internet rather than across the tunnel.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: