Okay, I had set this up upon receiving the device it worked perfectly fine. I have no idea what happened but today it currently has a Orange or red power light and a occasionally blinking LAN (Ethernet) light. It doesn't work what so ever and I cannot get a IP on the device. All it does is push out and repeatedly push out the captured packets on the image attached below.
The reset button isn't working for the WAP371 for both the reset and factory settings reset. DHCP is running on my server and there are no VLAN's or anything on the 3550 Switch it is connected two I even tried attaching it to a different server and also attached it to a 3650 POE+
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 126.96.36.199 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 188.8.131.52 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...