Cisco SA540 inter-VLAN comunication issues

[oibarra_kobe]

Hi all,

Im having issues configuring my firewall to have multiple vlans, in the manual says that if you check the "inter vlan comunication", elements from different vlans will be able to comunicate between them, but in my case this is not happening. I have the following configuration

vlan1 -> 192.168.0.0/24 in port 1

vlan2 -> 192.168.10.0/24 in port 2

vlan3 -> 192.168.20.0/24 in port 3

I have tried both port configurations as "access" and "general" without success. In the case of general, I check all the boxes. Whenever i ping from a pc on a different vlan, only the gateway is respondig. Is there any setting i'm missing?

Kind regards

[Tom Watts]

Hi, can you create a couple screen shots of the router configs?

Please display the-

port to vlan

multiple vlan subnet

Available vlans

-Tom
Please rate helpful posts

[oibarra_kobe]

Hi Thomas,

I'm attaching the screenshots.

Im using ports 5,6 and 8. Trafic from port 8 shouldnt be visible for the other vlans. Nodes from port 5 and 6 should be able to see each other

This is ports config as acces

An then i tried configurong it as general like this

This are for multiple vlans and available vlans

Kind regards and thanks for the help