cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
840
Views
0
Helpful
2
Replies
Highlighted
Beginner

ISA550 site-to-site

I have an ISA550 router at both ends of the IPSec site-to-site tunnel with the following network configurations:

Site A Network: 192.168.1.0/24

Site B Network: 192.168.2.0/24

I ran the configuration wizard to setup the tunnel and used the default settings (I added the remote and local address objects but used the default IKE and Transform). The tunnel is up and I can ping the ISA550 on each end of the tunnel but I can NOT ping anything else on the network on the oppisite end of the tunnel. Any ideas on how to resolve this issue? Did I miss something?

2 REPLIES 2
Highlighted
Beginner

Hi

Do you check firewall ACL both of 2sites?

Sent from Cisco Technical Support iPad App

Highlighted
Rising star

igtamerica1,

Can you be more specific about what you are trying to ping? Are all of the devices PCs? In many cases we see issues with the Windows Firewall blocking traffic from a different subnet and a rule needs to be created.

- Marty