cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1636
Views
0
Helpful
3
Replies
spartan1833
Beginner

SA540 WAN QoS question

Hi,

Looking for some clarification on WAN QoS settings - what traffic is affected by Traffic Selection? For example, I've set up a rule that gives 512kb - 768kb for all traffic on port 1 of my SA540....is this outbound, inbound, some combination thereof? I have a 3072 / 768 link so looking for info on how this works and didn't really find a good explaination in the documentation.

Thanks

3 REPLIES 3
rshao
Beginner

Hi,

SA540 QoS applies only to the outbound traffic - traffic from LAN to WAN interface.

Richard

Thanks for the reply - so just to be clear does QoS apply to all outbound traffic, including traffic destined for a site-to-site VPN tunnel initiated by the SA540?

Thanks again - E

Ed,

That is right. QOS and bandwidth profile functionality is for outbound traffic and traffic over VPN, and using QOS you should be able to limit bandwidth for outbound traffic and traffic over Site-to-Site VPN.

Thanks,

Nitin