cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
713
Views
0
Helpful
3
Replies

Hairpinning in a RV340 router

JayJenkins35869
Level 1
Level 1

Can you manually setup hairpinning in a RV340 router? if so help is needed. 

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

not sure what is the requirement here for the hairpin for the intra lan ?

 

check this thread :

 

https://community.cisco.com/t5/small-business-routers/rv320-hairpin-intra-interface/td-p/2456325

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Martin Aleksandrov
Cisco Employee
Cisco Employee

Hello Jay,

 

If by saying hairpinning you mean communication between two LAN hosts behind your router using their mapped endpoint i.e. where one of the hosts on the LAN is able to access another host on the LAN via the external WAN IP address of the router (with port forwarding set up on the router to direct requests to the appropriate host on the LAN) that is not supported by the RV34x series. 

 

Hairpinning is supported on Cisco IOS-based ASAs and ISR routers.

 

Regards,

Martin

Sujoy Paria
Cisco Employee
Cisco Employee

Hi,

NAT hairpinning option was available in ISA500 series devices but now that Small Business device is End-of-Sale and End-of-Support since 2014.

In RV340 series Router that option is not available.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: