HelloI have an old switch that i want to update to latest firmware but seems that there is no firmware download anywhere in site.The model is SF200E-48 PoE. The file that is wanted is .stk file i try download .ros file but file is not supported.I kno...
Need to know how to remove a device we can access from the console but cant physicvally find in the office. There is an mx100 we can access the console, but is nowhere in the building. I need to know if we can remotely yank it off the network.
Good morning. I need a help I'm tempted as Wifi to put here in the company simple thing, with option of VLAN ID more I'm not managing to find information, This Wifi has Cisco Business 240AC Wi-Fi Access Point | 8ac | | 4x4 | 2 GbE Ports | Ceiling Mou...
Hello everyone,We have three switches, and two are connected via FC to our core; the connections are fine.Now I want to connect the third one to one of the other switches, either via FC or copper.I can't get the settings to be able to connect all of ...
I am trying to get an embedded probe added to our Cisco Business Dashboard. When going through the add wizard, it tells me that a device with the same PID already exists in the system. This tells me that this specific switch is already managed in the...
The plot thickens ... I've made progress and found that my core CSW switches were setup (not by me) with VLAN10 as the default VLAN, I of course went with the default and kept VLAN1.I followed the Cisco process from the commonly cited video guide to...
To find the right Support for your products.. Product Category Product Series Support Link Cisco Enterprise Devices ASA Firewalls https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ISR 800/1900/2900/3900 Series Rou...
Ive decided to be more granular with design and instead of a single all encompassing network I've broken things down.I need to move switches t the new networks but can't see an option to edit that? Can't find anything in docs or on Guru Google.Ideas...
HiHaving this issue since a few days after activating a self signed SSL certificate.I did follow the instructions on the published posts. The issue with the certificate does not disappear.Upload via TFTP on a Mac OS the latest available firmware and ...
Hi,Recent power outage took down my two CBS220 (named: DSW01 and DSW02) switches .. they are daisy chained under my CBS350 (name: CSW01). I've rebuilt DSW1 and DSW2 from clean boot. as I was locked out. (weird)CSW1 was unaffected and I've checked it...
Hi My CBS220 are current firmware, but I can't get them to accept CBD credentials ... just error saying "Not supported"Surely not.Any suggestions - Ive googled an the error doesn't even come up.Cheers Paul
Can Cisco confirm that power injector AIR-PWRINJ5 and AIR-PWRINJ6 have same power connectors C14, because as per data sheet from Cisco portal AIR-PWRINJ5 had C14 and the new one AIR-PWRINJ6 had C13 in data sheet. please confirm and share the correct ...
Hello I have a cisco MX700 and I got it from my work area and have it at home here. The software version is pretty old i'm running TC7.3.0.8cb420c and I wanted to know if there is a way that I can download the new software for it. And I do not hav an...
Hello,I would like to set up a security system in the event of a fault on two RJ45 ports. I want to configure two trunk links between the RV345P router switch and the SG350-28MP switch.On the Cisco SG350 switch side, I have followed this documentatio...
Hello everyone!Is there any way to reset the RV320 password, without hard resetting? I have the serial cable.I'm kinda screwed, cause the previous guy from IT lost all credentials, so if is there someway to reset, it would be veeeery usefull.Thanks i...
