cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.

Asterisk: Configuring Cisco SPA5xx phones with the Web-UI

9243
Views
0
Helpful
1
Comments

This application note is targeted to Asterisk administrators, users, enthusiasts, and those considering for the first time, Cisco's small business IP phones in a hosted environment. The Cisco SPA5xx phone family is introduced. The document describes how to factory reset a phone, upgrade its firmware, register it to an Asterisk server, and add extensions.

Comments
Beginner

I believe there's a typo on page 14 that can prevent users from receiving onbound calls.  I was able to make calls via an Asterisk PBX just fine but inbound calls wouldn't ring on the SPA525G.  Digging in I saw that I had not set "Use Auth ID" to 'yes' and I hadn't set the "Auth ID".  On page 14, section 2, b, it has the extension password of '151secret' for the 'Auth ID:' but it should be the actual extension # '151' rather than the extension password.

Again, the 'Auth ID' should be your SIP extension # rather than the extension password.