You can join a Cisco WebEx Telepresence bridge as a video participant or as an audio participant from a PSTN landline or mobile phone.
Video calling parties
Dial one of the following
The custom video address for video direct access: [display name].email@example.com.
The Telepresence bridge entry in your device's contact list.
Audio-only calling parties
Dial +1 (650) 963-0030.
When prompted, enter the 8-digit conference ID.
The WebEx Telepresence bridge service supports inbound calls only from WebEx Telepresence devices, standards-based H.323/SIP video devices, and PSTN calling parties. The WebEx Telepresence bridge service does not offer dial-out capability.
I have an issue I am unable to understand and resolve. I recently installed an SG350X-48P Gigabit switch. We have several VLANs on the switch and we can access the internet via the Default Gateway, but only when the PC is configured for DHCP. If the ...
We are a small firm with 15 to 20 computers. We currently use the Cisco ASA 5505 Adaptive Security Appliance and the SR 2024C 24 port 10/100/1000 switch. I need to update our system. Any recommendations would be appreciated.
Hey folks,Had a long-term issue which I've been slogging every so often to sort out and finally seems like it's an issue with the Huawei modem not bridging correctly.Here's a (hopefully clear) map of what I have: Essentially I have a single internet ...
Hi;I have to configure a C881 to use in addition to the WAN port (the WAN port will be connected to a hub switch that will go to an MPLS network to an ISP) plus another port as the client's LAN access.It turns out that with the exception of the WAN port, ...