Call Accounting/CDR are available with the UC500, based on existing CME feature. CME GUI has a call history report, not very feature rich but will tell you calls though the system.
Today customer has a number of choice choices;
1) Use a External FTP server or store on flash memory* (Easy and Reliable implementation) You can configure the UC500 / CME to store CDR's on the UC500 in a CSV file. This CSV file can the be uploaded of the box using FTP and manipulated as required
* writing data to flash is not recommended since UC520 flash is only 128M and is near full at this point
3)Use a External Radius Server (Advanced Implementation) You can deploy a separate Radius server/PC to collect the CDR Records. These records could then be exported to Excel or some database application and create/run reports for their use: Setup & Configuration Guide Sample Configuration Sample CDRs
4) Use a 3rd party billing tool that integrates with Cisco e.g.
Hi, We've installed about 60 of these switches, seem to be getting odd behavior from time to time. Sometimes all PoE devices will be unreachable and ports will be in a state that can't be fixed by disabling/enabling PoE. To get around it, ...
Hello professional, I bought a RV 345 last month and configured for connecting internet. Last thanksgiving week, our building had outage issue. Electricity supplies were back to normal in an hour, and the router was not back to normal. Every con...
I have Cisco Business 350 Series. As i tried to configure user ADMIN secret hallothere, it didn't show any secret command but only password. I interpret this as if it has no secret command anymore. After I setuser Admin password hallothere priv...
Hi team,I have the following question: Does the SG220-26 support DHCP Relay?If yes, can you give me the link to the documentation about this command, I have searched many places but still can't find it.Thank you!
Starting with v2.5.7 the firmware files have "signed" in the name. What is the upgrade path if I am currently on v2.4.0? Can I go straight to a signed firmware? Is there some prep step I need to take before apply a signed firmware? ...