SPA3XX and SPA5XX feature the possibility to offer information and communications services based on the Cisco XML Service Interface (XSI).
We developed a series of applications based on XSI for Asterisk-based environments, open a new set of possibilities to use the SPA phones for productivity applications, including information services, extension mobility, IVR, monitoring, etc.
The list below includes the links to documentation and scripts needed to develop the following services/applications under Asterisk, using the Cisco XSI interface on SPA products*:
Autodialer: This application allows for configuring an autodialer, defining the callers of the campaign and the called numbers for each campaign.
Visual Voicemail: This application allows the phones to provides a visual voicemail under Asterisk, and be able to access and hear the inbox.
Day/Night mode: This application allows the switching between day and night ringing mode in Asterisk.
Information Menu: This application offers (information) menu on the phone. It allows showing of information structured in menus and submenus, that can be used in hotel, business centres or offices for information purposes.
* These features have been tested on the SPA5XX only, as documented in each application note. It is assumed that features will also operate on the SPA3XX, however Cisco cannot guarantee successful operation. These scripts and the associated documentation is provided as is, and under no service warranty of operation.
Hi, I have Cisco RV345, and looking for a way to isolate 3 devices (LAN Ports) that communicate using Layer 2. VLAN 1 - Standard and running DHCP (ipv4 only) - inter-vlan disabledVLAN 3 - Standard and running DHCP (ipv4 only) - inter-vlan d...
I have a dot1x setup on a sg300: dot1x system-auth-controlencrypted radius-server key xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxradius-server host x.x.x.x usage dot1.xinterface gigabitethernet5dot1x host-mode single-hostdot1x violation-mode shutdown trap 10dot1...
My Setup as follows:Router/FW: 192.168.5.1 || VLAN 6-8 || DHCP server for all VLANsVLAN 6: 192.168.6.1/24VLAN 7: 192.168.7.1/24VLAN 8: 192.168.8.1/24 SG300 Switch: VLAN 1: 192.168.5.5 || L3 ModeConnected to Pfsense on GE25 (Trunk)VLAN Interface confi...
We are using rv130 to connect internet. IPS offering internet connection via PPPOEv6 and IPV6 address. WAN port can receive IPv4 and IPv6 address. How can I config DHCPv6-pd ,so that on of my server on LAN can assign IPV6 address from ISP.&...
Hi, working on a CBS350-8T-E-2G, for reference. some notes: - please could be popups be off by default? (pretty bothering to see al those warnings when you log from a new browser)- Save blinking icon is spawning only when you're going back to ge...