SPA3XX and SPA5XX feature the possibility to offer information and communications services based on the Cisco XML Service Interface (XSI).
We developed a series of applications based on XSI for Asterisk-based environments, open a new set of possibilities to use the SPA phones for productivity applications, including information services, extension mobility, IVR, monitoring, etc.
The list below includes the links to documentation and scripts needed to develop the following services/applications under Asterisk, using the Cisco XSI interface on SPA products*:
Autodialer: This application allows for configuring an autodialer, defining the callers of the campaign and the called numbers for each campaign.
Visual Voicemail: This application allows the phones to provides a visual voicemail under Asterisk, and be able to access and hear the inbox.
Day/Night mode: This application allows the switching between day and night ringing mode in Asterisk.
Information Menu: This application offers (information) menu on the phone. It allows showing of information structured in menus and submenus, that can be used in hotel, business centres or offices for information purposes.
* These features have been tested on the SPA5XX only, as documented in each application note. It is assumed that features will also operate on the SPA3XX, however Cisco cannot guarantee successful operation. These scripts and the associated documentation is provided as is, and under no service warranty of operation.
The Device Credentials page in my copy of FindIT is picking up my network printer and asking for SNMP credentials. My network printer doesn't support SNMP. Is there a way to exclude the printer from appearing in the Device Credentials page? Also, whe...
I managed to bork a SG350-10P and running Release 220.127.116.11. It was fine running Release 18.104.22.168 and when I upgraded it to 22.214.171.124, it went into a reboot loop. I consoled into the switch to tell it load 126.96.36.199, but was unsuccessful.&nb...
Hello, Last year, we purchased an RV325 through authorized Cisco distributors in Brazil. However, due to the COVID 19 pandemic, we need to connect our employees via VPN. We created OpenVPN accounts and were surprised when the number of simultaneous connec...
hi, I have a IIS 7 webserver with some site running on it. when we change the current old router by a RV340, i get SSL erros on al the site using https when i acces the sites from they WAN. anyone an idea what is wrong? thanks Jeffry
Hi, After noticing no clients associated on 2.4GHz, I discovered that my WAP371 stops transmitting on Radio2 (2.4GHz) while 5GHz works OK. A reboot brings it back to life for a short while. This can be clearly seen with a Wifi analyzer app on the tab...