This video explains how to configure dual WAN settings on RV0xx Series VPN Routers.
A Wide Area Network, or WAN, is a network that connects Local Area Networks together. The RV042, RV042G, and RV082 Routers support a dual WAN feature that allows both WAN ports to be used at the same time. The dual WAN connections can also be configured as a failover to ensure continuous internet connectivity. These routers also use protocol binding to further optimize the dual WAN configuration. Protocol binding allows certain traffic to be sent through a specific WAN port.
Please click the following link to watch the video:
When switches Cisco SG350X-24 reach 497 days without restart, uptime is reseted. No reboot, no SNMP message, just counting from 0 again. Why?? I got more of them and all do the same thing. Using PRTG to monitor over SNMP. FW ver. 188.8.131.52
I have RV160 Router that is part of my network, the RV160 is only used for VPN access. When I am connected to the VPN I am unable to access local network. IE can't print to printers or access mapped network drives. My network topology is a...
Hello , i have upgraded the migrated the firmware of Cisco 8845 IP phone from enterprise firmware to MPP firmware. Firmware migration went well and all seems good.. but when i tried to register the IP phone over SIP TLS to Asterisk PBX , ...
Hello, i have a IP Phone 7970 which won’t even attempt to pull the Firmware from the TFTP Server after a Hard Reset (3491672850*#).I am using TFTPD32 by Phillipe Jounin as DHCP and TFTP Server.Under the „Log“ tab I can see that it sends a DHCP Reques...