An Executive Summary report can be shared with your existing customers (or with prospects) to provide a high level view of the network.
The summary can include the following information:
OnPlus Network Agent Status
Internet connectivity report
Topology diagram of the monitored network
Network event summary
Cisco product support information (product warranties, end-of-sale and end-of-life products, service contracts
To create an Executive Summary report, follow these steps.
Navigate to Overview > Report Listing.
On the Report Listing page, click + Create Report.
Choose Executive Summary as the report type.
Choose the report format (Adobe PDF, CSV, or XHTML).
Select the customer.
Enter notes to display on the cover page of the report, then click Next.
On the Sections page, click to select or deselect the sections you want to include in the report, then click Next. For example.
Set reporting scheduling options. To create the report immediately, choose Now for the Report Creation date.
Click Save. The report will be queued for processing.
To view the status of your report request or preview and download completed reports, choose Reports > Report Listing. You may need to refresh the Report Listing page to view current report status, especially if you just created the report.
Hi there,I have a Cisco Router, a Cisco Switch and even if I plugged the Ethernet and Internet ports of the SPA122 into the Switch I can't access the web interface. I still can't access the web interface even if I restart to the factory settings. I can ac...
We have two unstacked switches connected via 2x 10G links setup with LACP on each switch identically (models and firmware below). We are observing constant "flapping" (not physical, but port removed/added to LAG group) on only one of the two aggregat...
I'm not sure what I am doing wrong here. I'm able to see the DSL connection, but I'm not able to get an IP, whether it be through the wizard, or in the settings directly. I saw that other cases meant removing the default and fixing up the VLAN. Anyone els...
I'm using a Firepower 1010 with the FTD platform. I receive a dynamic IP-Adress from my ISP. That's why I need a DDNS Client on the Firewall (for example no-ip or dyndns.org) to make it available for VPN-Clients. I'm managing the Firewall with Firepo...
Hello Community, I have installed a CISCO ATA191 and trying to connect it with the German Telekom Cloud PBX Environment.Device is not getting sucessfully registered. Please find below the last entries from the LogFile.Any Explanation about the meanin...