Factory reset SPA525G and SPA525G2 IP Phone. IP Phones are configured to factory reset if the user wants to start fresh on the device without any configuration on the IP Phones. It can also be used in case the IP Phone is not acting normally.
Factory Reset on the SPA525G and SPA525G2 IP Phones
Step 1. Press the Setup button on the phone. The Information and Settings menu appears.
Step 2. Use the navigation keys and scroll down to Device Administration. Press the Select softkey.
Step 4. In the Device Administration page, scroll down to Factory Reset option and press the Select key to factory reset the IP Phone.
Step 5. In the Factory Reset page, press OK soft key to confirm the factory reset of SPA525G or SPA525G2 IP Phone.
I am trying to resurrect an old RV082 that I replaced several years ago. When I try to connect to it all browsers tell me that there is a certificate error, apparently corrupted. How can I fix this so I can reuse the device?
Just got a brand new WAP581 and I have been trying to set it up to replace a WAP371. Problem is when I connect it to my weeks old 2960L I don't get a link light (using a PoE injector). So far the only way I have been able to get it to connect is...
I'm replacing a Netgear VPN Router (FVS336Gv2) with a Cisco RV340. The Netgear setup is using:Local ID: fvs_local.com and Remote ID:fvs_remote.comThe client GreenBow settings are the opposite:Local ID fvs_remote.com and Remote ID:fvs_local.comSo, the...
I have six WAP371 connected to my local network. They all connected in to one cluster. recently, I see that, colleagues keeps disconnecting and connecting again, no more stable Wi-Fi signal. They disconnect for less than a second and connects automaticall...