Objective
This article guides in upgrading firmware on the SPA400 Internet telephony Gateway.
Applicable Devices
This document applies for the SPA400 Internet telephony Gateway.
Software Download URL
SPA400 Internet telephony Gateway
Upgrading the Firmware of the SPA400
1. Access the SPA400 - Internet Telephony Gateway with 4 FXO Ports web-based setup page.
2. When the VoIP gateway's web-based setup page appears, click Administration then Firmware Upgrade.
3. When the Firmware Upgrade window opens, click Browse. Look for the .bin file which contains the files necessary to upgrade the VoIP gateway's firmware.
4. Browse to the location where the firmware files were extracted and select the .bin file. When the file is selected, click Open.
5. Click Upgrade.
6. Power cycle the unit.