You can change the online presence status that other Cisco Jabber Video users see when they look up your contact.
Click the current status icon to the left of your name in the Jabber Video control screen.
Click a new status.
When you are on a call using Jabber Video, your status changes automatically from Online to Busy. However, your status is not displayed if you are using the Cisco Callway service outside of Jabber Video.
Depending on your settings/preferences, setting this status may turn off your ringer (see Settings/Preferences).
Hello, We have 2 locations that are connected site to site with a rv320 at each location. We are now trading them out for rv345 at each location. We are using site A: 192.168.1.x and site B: 192.168.2.x I am able to establ...
I am doing VoIP on l3 switch all phones are getting ip but don't extension number because I don't know how to do that on l3 switch as there's no option of "telephonic-service" on l3 switch as on the router is possible.kindly help in this scenario how to d...
Hi Guys this is driving me crazy as its makes no sense to me. 2 x cisco 550x switches set to stand alone mode. Connected via ethernet both on ports 25. S1 L3sg 550, S2 L2 native vlan set to vlan 100. second create...
HelloI'm facing to a very strange behavior in the small business switches.For a reason that I ignore the small business learn mac address in a wrong way.I have 2 Pc that are connected to 2 differents switches 1 PC is connected to a small business SG5...
installed a new router Cisco RV340W dual wan, connected to 2 ISP, the Internet works in 2 local networks all separately, everything is OK, each local network your white ip, firmware is the latest 1.0.03.24, almost all ports are closed in fairvilleon all c...