cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

How to configure dynamic MAC port security on SX300

4549
Views
0
Helpful
0
Comments

How to configure dynamic MAC address port security on the SX300 series using 1.2.7.76 code

1.) Connect the desired computer to a port and verify the MAC address populated in the dynamic table

dynamic_mac.JPG

2.) Configure the port security on the corresponding port, on my example FE1. I chose action shut down upon violation.

port_security.JPG

3.) Connect a different device to the corresponding port, this will create the shutdown condition as soon as the deviant MAC address is detected

action_violation.JPG