cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Get the latest Cisco news in this December issue of the Cisco Small Business Monthly Newsletter

How to create a Cisco VPN Client Profile compatible with the UC500 EZVPN Server

6234
Views
0
Helpful
0
Comments

********************************************************************************************

For a free copy of the Cisco VPN Client software, visit cisco.com/go/vpnclient

Or naviagte cco to:

http://www.cisco.com/en/US/products/ps5743/Products_Sub_Category_Home.html

(down near the bottom you will see VPN Client for EZVPN)

EZVPN.bmp

********************************************************************************************

To create a profile to use by customers to VPN into the UC500, do the following (make sure that UC500 VPN Server feature has been configured using CCA):

1) Paste the text below into Notepad.

2) Replace the highlighted parameters with your Site Description, FE0/0 IP address or name (If using DDNS) and the Group password.

3) Save to a file using a .pcf (dot pcf) extension.

4) Import from your Cisco VPN CLient.

5) Try to connect from the WAN side.

[main]
UserPassword=
enc_UserPassword=
Description=My Site
Host=A.B.C.D
AuthType=1
GroupName=EZVPN_GROUP_1
GroupPwd=XXXXXX
enc_GroupPwd=
EnableISPConnect=0
ISPConnectType=0
ISPConnect=
ISPPhonebook=
ISPCommand=
Username=
SaveUserPassword=0
NTDomain=
EnableBackup=0
BackupServer=
EnableMSLogon=1
MSLogonType=0
EnableNat=1
TunnelingMode=0
TcpTunnelingPort=10000
CertStore=0
CertName=
CertPath=
CertSubjectName=
CertSerialHash=00000000000000000000000000000000
SendCertChain=0
PeerTimeout=90
EnableLocalLAN=0