The Cisco CCA team announces the availability of the latest release of Cisco® Configuration Assistant. Version 3.2 is focused on quality improvements along with a number of new features. Cisco Configuration Assistant is an easy-to-use interface for managing platforms within the Cisco Smart Business Communications System (SBCS).
This announcement covers the following topics: 1. Highlights 2. Documentation 3. Detailed description of new features and enhancements
1. Highlights - Improvements in software quality and user experience - Key features and enhancements (see section 3 for details): Multisite: Site-to-Site VPN and Site-to-Site dialing ACL Management Generic SIP trunk template, including:
Timer and retry management for SIP trunks
Toll fraud protection for SIP trunks
Support for additional SIP Trunk providers: Integra, Keyyo and OpenIP Unknown plan type for International calls for ISDN carrier Editable IP phone URLs Editable SSL VPN port Ability to accept DHCP-assigned WAN IP address for SSL VPN Call Ring features:
No call-waiting beep
Beep with no ring
2. Documentation For more information and to download Cisco Configuration Assistant, visit: http://www.cisco.com/go/configassist (Note: CCA 3.2 documentation available on January 30th, 2012) https://supportforums.cisco.com/community/netpro/small-business Note: Cisco Configuration Assistant 2.x installations cannot be updated to Cisco Configuration Assistant 3.0 and later using the Application Update process. You must download Cisco Configuration Assistant from Cisco.com (www.cisco.com/go/configassist) and install it manually. For a full list of features supported in Cisco Configuration Assistant and the Cisco SBCS, please refer to the Cisco Smart Business Communications System Feature Reference Guide (available on January 30th, 2012): http://www.cisco.com/go/sbcsfeatures
3. Key Features and Enhancements Multisite: Site-to-Site VPN and Site-to-Site dialing: Allows users of CCA multisite to have Site-to-Site dialing only, or Site-to-Site VPN only, or both. ACL Management: Allows new ACLs to be added to the list of already existing ACLs generated by the CCA. ACLs used by CCA are not editable. Ability to backup current ACL configuration. Ability to restore a backed-up ACL configuration. Generic SIP trunk template: Allows new service providers to be added in CCA without the requirement to import XML template. Allows modification of service providers, including options for voice codec, fax protocol, registration, DTMF, call transfers, and call forwards.
Timer and retry management for SIP trunks: Allows configurations of timers and retries for the SIP user agent.
Toll fraud protection for SIP trunks
Support for additional SIP Trunk providers: Integra, Keyyo and OpenIP Unknown plan type for International calls for ISDN carrier: Allows to map all outgoing calls to unknown numbering type and plan. Editable IP phone URLs: Allows configuring URL information under telephony service. Specific URLs are provisioned on the Cisco IP phone; these URLs point to XML-based web pages formatted with XML tags that the Cisco IP phone understands and uses. Editable SSL VPN port: Provides the option to configure SSL VPN port during SSL creation on UC500. Ability to accept DHCP-assigned WAN IP address for SSL VPN: Allows creation of SSL VPN using DHCP WAN IP and also warns the user of any changes to the WAN IP that will cause SSL VPN to not work. Call Ring features:
No call-waiting beep: Disables call waiting beep sound
Call-waiting ring: Allows to select a ringing sound for call waiting
Distinctive Ring: Distinctive ring is used to identify internal and external incoming calls. An internal call is defined as a call originating from any Cisco Unified IP phone that is registered in Cisco Unified CME or is routed through the local FXS port.
Missed calls: To report missed calls to directory numbers on an IP phone.
Silent Ring: Audible ring and call-waiting beep are suppressed for incoming calls. The only visible cue is a flashing icon in the phone display.
Feature Ring: Differentiates incoming calls on a special line from incoming calls on other lines on the phone. The feature-ring cadence is a triple pulse, as opposed to a single pulse for normal internal calls and a double pulse for normal external calls.
Beep with no ring: The line ringer is suppressed on incoming call, but the handset light still flashes. Call waiting beeps are allowed during active calls.
Cisco Configuration Assistant 3.2 is backward compatible with previous Cisco Configuration Assistant and Cisco UC500 software pack releases.
In summary, Cisco Configuration Assistant 3.2 delivers many quality improvements and a number of new features. The Cisco Configuration Assistant team will continue to develop features and capabilities as we learn more about our customers' needs.
I’ve an RV260W with firmware 1.0.00.17 and trying to set up secure incoming port forwarding rules. I want a specific public IP address to have access to an internal service, all other public IP addresses else should be blocked. I’d expect this to wor...
Hi, First time using the RV260 series router. I'm setting up a client to site VPN connection using IPsec. It appears straight forward but I can't get it to connect. According to the Cisco docs it should be compatible with the native Android VPN client. Th...
Let me know it is possible to switch the SG250-08 Small Business Switch to Layer 3 mode.I've found in switch management GUI in Advanced View position Interfaces that for all port it is possible but my question concers how to switch all device to L3 mode.&...
Hello everyone,i need to connect an IR 829 to the internet. i am not able to get access to the Routers Lan ports there ist no way to assign an IP. i get allways error message " IP addresses may not be configured on L2 links. I checked further information ...
SG200-50 fw: 220.127.116.11 I am currently monitoring the interface utilization of a certain server down to client PC.The network connection looks like this.Server ----- Server Sw ---- Core Sw ---- Distri Switch ---- Access Sw -- Client PC Issue:The Tx...