cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

PPTP SERVER ADDRESS IN A RV110W

3237
Views
0
Helpful
1
Comments

Hi there,

I am trying to connect my office with a remoute PC using VPN, Microsoft PPTP client and a rv110w router in my office.

Setting up the rv110w in section VPN > VPN Clients:

The first parameter sais: PPTP Server

The second one sais: IP address for PPTP Server

I need to know if i must enable the PPTP Server box and what address should I give

Thanks

Carlos

Comments
jasbryan
Frequent Contributor

Yes you need to enable PPTP client and for the range of ip address you want to make within the same range of your vlan1 subnet range. So if you're router is 192.168.2.1 for vlan 1 then make PPTP server 192.168.2.200-210. Just make sure you create the user and enable the user for PPTP.

Jasbryan