cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

Rack Mount Kit for UC500 (ACS-UC500RM-19=)

4621
Views
5
Helpful
5
Comments

Rack_Mount_UC500.JPG

Comments

For 24U annd above SKUs, use the kit for the ISR 3825

There is some guidance provided at the website  below:
relionllc
Beginner

Hi, I know it's obsolete and all, but for a UC520-8U, I need to get it rack mounted and the published part number (ACS-UC500RM-19=) is basically out of existence. I just need those long ears. If I remember correctly, isn't this chassis the same as another old ISR, like 1841 or something like that? Bottom line, is there another part number that I CAN still order that will rack mount this UC520-8U? It's the same as the uc540, too, no?

Thanks.

BRIAN SEKLECKI
Beginner

Same question here! ~BAS

BRIAN SEKLECKI
Beginner

The UCS520W and 1861 are basically the same chassis, 10.5" wide, so the rack ears should be shareable, if the screw holes line up.

 ACS-1861-RM-19

I'll let you know.

7 Years....

~BAS

BRIAN SEKLECKI
Beginner

IT WORKS:

1861 rails are a perfect substitute.  And ACS-1861-RM-19 is still readily available on the market.

https://photos.google.com/share/AF1QipOR1oKo03F9qs67kny3T0QJ9KV904ZVvqjs6Jj7iXav6wTv0TfJxPR9Q5aJHH975g?key=dUdEOEJlbXNYNmpQWk1Ua1VwUmdzUF9mWU1fT1l3

https://plus.google.com/+BrianSeklecki/posts/7docb6ExRo5

~BAS