As an alternative to selecting, testing, and adjusting your microphone, speakers, and camera separately (see Select and test your microphone and speakers and Select and adjust your camera), you can run Quick Setup to perform all these tasks at once. Quick Setup also provides information about your maximum camera resolution, system resources, outgoing bandwidth, and expected outgoing video quality.
On the Cisco Jabber Video for TelePresence control screen, do one of the following:
Windows: Click , and then click Quick Setup.
Mac: From the main menu, click Jabber Video > Preferences. Click About.
Under Microphone, do the following:
Click the list and click the microphone you want to use.
Talk to test the microphone.
Drag the slider to adjust the microphone level to the recommended range.
Under Speakers, do the following:
Click the list and click the speakers you want to use.
Click Test to test the speakers.
Drag the slider to adjust the speaker level.
Under Camera, do the following:
Click the list and click the camera you want to use.
Manually adjust the camera to position your face correctly in the frame.
The screen displays information about your camera resolution, outgoing bandwidth, and other system resource information. Click Finish.
Hi,I have a problem with switch SG220-26 , throughout the company we have a vlan assigned to telephony (Cisco model IP phone 303) , only on this switch vlan (phone) does not work. Can you help me? How do I configure this switch correctly?
I've connected recently on an SG500X and an SG500 several devices and all of a sudden the port VLAN settings change to default, PVID1, and Tagged all available Vlans. In an instance, I connected a Yeastar PBX on an untagged vlan40 port, and all of a...
Hi, I've set up an working PPTP VPN on Cisco RV220W.I can connect to the VPN with Windows 10 build in VPN service. But when I'm conneted to the VPN I can't see the server I want to reach.In a browser I can see go to local IP addresses like print...
Hello, how do i register my product? It is a new Cisco SG350X switch. I tried going to Product License Registration "https://software.cisco.com/software/swift/lrp/#/pak" , it is asking for PAK, i do not have this. I can provide the serial number...