cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4973
Views
0
Helpful
0
Comments
Patrick Born
Cisco Employee
Cisco Employee

Ever wonder how you can send a phone's complete HTML configuration to someone for analysis?

It's simple and is done in a few seconds.

You'll need:

  - Device's IP address

  - Computer with network access  to the device

  - Administration password for device [if set]

Save the configuration of any SPA5xxG, SPA9xx, or WIP310 IP phone as follows

1. Direct your browser to http://<IP_of_device>/admin/advanced or http://<IP_of_WIP310>/admin

2. Use your browser's save page feature to write the device's entire configuration to a single file:

    • IE: Page > Save As > Save as type Webpage, HTML only
    • FireFox: File > Save Page As > Save as type Web Page, complete

3. Name the file as follows: Device_date_time.html

Example: SPA504G_April282010_10h17.html

Now you can send the SPA504G_April282010_10h17.html to someone in order to show them how you have configured the device.

Enjoy!

Note: The Bluetooth and WiFi tabs of the SPA525G must be saved separately.

<end>

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: