Download the Cisco QuickVPN utility from the link below:
http://www.cisco.com/en/US/prod/routers/quick_vpn.html
Enable Remote Management under Administration.
Use port 443 or 60443. Please try both & se which one works the best.
DO NOT ENABLE any other Port Forwards.
VLANS are OK if they have InterVlan routing enabled.
Under a VLANS create a new VPN user.
Enter the username and password.
Do not use any special characters & make sure they are at least 6 cahracters long.
Enter your Profile Name username password & server address & port in QuickVPN.
If you run into problems try the prot scanner at yougetsignal.com to see if your ports are opened.
Download the Cisco QuickVPN utility from the link below:
http://www.cisco.com/en/US/prod/routers/quick_vpn.html
Enable Remote Management under Administration.
Use port 443 or 60443. Please try both & se which one works the best.
DO NOT ENABLE any other Port Forwards.
VLANS are OK if they have InterVlan routing enabled.
Under a VLANS create a new VPN user.
Enter the username and password.
Do not use any special characters & make sure they are at least 6 cahracters long.
Enter your Profile Name username password & server address & port in QuickVPN.
If you run into problems try the prot scanner at yougetsignal.com to see if your ports are opened.
