Nokia's Intellisync CallConnect SCCP client is a SCCP client for Nokia E-series. When installed and properly configured on a E-series, it allows a Nokia to detect the WLAN and automatically register to CME. So at the office, the Nokia will just be another IP phone on the network. Outside the office, it will be a mobile phone.
For Single Number Reach functionality, please have a look at Cisco's Unified CallConnector Mobility, see Cisco Unified CallConnector. This'll allow the users themselves to configure up to four phones to ring when called, depending on a number of criteria. Through Unified CallConnector Mobility's Single Number Reach functionality, CUE will be the only voicemail inbox used (unless the caller directly dials the user's mobile phone number).
Hello,I have set up my IP-phone. Now I can make phone calls and also I receive incoming calls. However there is one problem with incoming calls:After some minutes after the last outgoing call my phone is not reachable for incoming calls anymore. ...
May I ask how to set PMF as REQUIRED in version firmware version 220.127.116.11 of WAP150? Guide published in 2019-08-20 shows PMF but there's no newer guide that matches the release of 18.104.22.168 in 2020 on showing how to set PMF to required.
How do I setup PC port spanning in the small business configuration web-based utility ? I am trying to use Wireshark by connecting the computer to the PC port on the SPA504g. However, I am not seeing the SIP or RTP packets. I can't find the "Span to PC Po...