Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
NEW!SPA IP Phones online training (Registered partners only - password required) The purpose of this course is to introduce the student to the features and functions of the SPA IP phones. Additionally, this training addresses market opportunities and dynamics that will assist with product sales and well as technical details. Upon completing this training, you will be able to:
Understand various attributes that influence demand
Describe the four deployment methods of the SPA900 IP-Phone
Review the configuration parameters
List common troubleshooting techniques
Errata: This training contains following errata, we are trying to correct it as soon as possible!. (1) IP Centrex definition is incorrect, on IP Centrex deployment scenario, call control is managed by the ITSP (there is no SPA9000/SPA400) and there is no limit on the number of phones (other than the one imposed by the ITSP or the bandwidth).
(2) Following SPA525G features are not available: Wideband audio and VPN over TLS support.
Hi I'm trying to make pptp vpnbut i can't internet net connection I'm using this simple configuration configure terminalvpdn enablevpdn-group 1accept-dialinprotocol pptpvirtual-template 1exitinterface Virtual-Template1ip unnumbered FastEthernet ...
Hello,I am hoping someone can help point me in the right direction here, I am looking for quite a basic setup. We have just purchased 6 x SG-350 and I am having trouble working out if my config is right. I am used to Catalyst IOS and these switches h...
dear all,I did a factory-reset all on my cisco catalyst 9200 switch.loaded the ios from TFTP. ( went successful )but now I want to store the ios in the flash, because when I restart the switch is goes back in the rommon mode instead of loading the ios.I h...
Hello everyone. I recently purchase a Cisco RV340 Small Business router for a customer. One of the customer required configuration is that the router be configured to have the bandwidth dynamically managed for equal bandwidth distribution to all users reg...
Hi Sir / Ma'am, Hi guys could you help me resolving my concerns regarding routing.Currently I have 2 routers 1) RV325 and 2) TPLink WR840NMy ping coming from 220.127.116.11 cannot pass through 192.168.100.0/24. I tried different config, but ...