The feature can also be set in the phone's configuration file where the configuration file's information is as follows:
<Resync_At__HHmm_ ua="na">2132</Resync_At__HHmm_> <!-- at 9:32PM -->
By default, this value for this option is blank which indicates that the feature is not enabled.
In the event that an invalid entry in inserted into this field, the feature will not be enabled.
In order to prevent a server from being flooded with simultaneous resync requests from many phones, the phone will automatically trigger a resync in the range of resync time plus ten minutes. In other words, if the phone is configured to resync at 9:32 PM, it will resync any time between 9:32 PM and 9:42 PM [This random +10 minutes is not user-configurable.]
Note1: If the Resync_At__HHmm_ parameter is provisioned, Resync_Periodic is ignored.
Note2: The Resync_At__HHmm_ parameter co-exists with all other resync parameters and resync triggers.
Hi Everybody I've received a Linksys SGE2000p switch that came with the original boot and firmware version: 1.0.0.05 / 126.96.36.199, and I've been trying to found unsuccesfully a newest image version. I've contacted Cisco support and they say that t...
hey every oneI am working on a sg300 switch that the interface VLAN 1 IP is 192.168.1.224 and the default gateway is 192.168.1.100.the management IP of the switch is accessible from the ICT VLAN 15.everything works ok but I have a virtual machine in VLAN ...
Is there a way to check to see how much data usage I use per month over the WAN (WAN1) on the RV345? I'm on an unlimited WAN connection with my ISP, so it doesn't matter for data caps, I'm just curious if I am able to locate this information if I ever did...