The SPA3xx/5xx IP phone family allows you to configure the phone to support N-way conference calls by using an external conference server.
By factory default, the phones are configured to support 3-way phone-based conferencing.
If you have a conference server, you can configure N-way conferencing on the phone that will initiate conference calls.
Note: The phone will only use one method of conference bridging, either phone-based 3-way or server-based N-way. Once you have configured a Conference Bridge URL, the phone will use server-based conferencing for all conference calls.
Use either of the following ways to configure server-based conferencing on your phone:
Using the web-UI, edit the Ext N tab > Call Feature Settings > Conference Bridge URL: parameter
Using a configuration file, edit the appropriate Conference_Bridge_URL_N_ parameter:
Looking to add a redundant core switch to our infrastructure.We are a small business with 80 computers and 8 servers. We already utilise SG500 The current Setup is a Tier2 architecture.Firewall X0 (VLAN50) corporate to 4x SG500 stack - 7 servers...
Need help please, I have Cisco SG-35028P switch , I have a task of creating two or three VLAN's with DHCP and internet should work for the clients. Can you please guide me. communication within vlan is not required. I have 1) Ci...
Hi, I have Cisco RV345, and looking for a way to isolate 3 devices (LAN Ports) that communicate using Layer 2. VLAN 1 - Standard and running DHCP (ipv4 only) - inter-vlan disabledVLAN 3 - Standard and running DHCP (ipv4 only) - inter-vlan d...
I have a dot1x setup on a sg300: dot1x system-auth-controlencrypted radius-server key xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxradius-server host x.x.x.x usage dot1.xinterface gigabitethernet5dot1x host-mode single-hostdot1x violation-mode shutdown trap 10dot1...