The SPA525G can display any size JPG image, but the phone's screen is 320x240 pixels in size.
The JPG images can have up to 32-bits of color depth.
Basically the above means that you can display any JPG image that you like. [Please remember that this is a phone, so don't expect it to deal with megapixel-sized files. A photograph or a logo will be under 200kB in size.]
Configure Wallpaper Selection Using the phone:
Copy your favorite photos on the USB key into the \pictures directory.
Insert the USB key into the SPA525G's USB slot.
Press the setup button [looks like a page with top-right corner bent]
Press 6, User Preferences
Press 3, Screen Preferences
Scroll down to Wallpaper
Navigate right to display the Select an image screen This causes the phone to check the USB key's \pictures directory
Press View display a full size version of the image Use the Previous, Next, and Back soft keys to scroll between the images
Press Select to choose the new background image
Press Set to save your selection
Press the setup button [looks like a page with top-right corner bent] to exit and display the phone's regular display with the new wallpaper
Hi there,I have a Cisco Router, a Cisco Switch and even if I plugged the Ethernet and Internet ports of the SPA122 into the Switch I can't access the web interface. I still can't access the web interface even if I restart to the factory settings. I can ac...
We have two unstacked switches connected via 2x 10G links setup with LACP on each switch identically (models and firmware below). We are observing constant "flapping" (not physical, but port removed/added to LAG group) on only one of the two aggregat...
I'm not sure what I am doing wrong here. I'm able to see the DSL connection, but I'm not able to get an IP, whether it be through the wizard, or in the settings directly. I saw that other cases meant removing the default and fixing up the VLAN. Anyone els...
I'm using a Firepower 1010 with the FTD platform. I receive a dynamic IP-Adress from my ISP. That's why I need a DDNS Client on the Firewall (for example no-ip or dyndns.org) to make it available for VPN-Clients. I'm managing the Firewall with Firepo...
Hello Community, I have installed a CISCO ATA191 and trying to connect it with the German Telekom Cloud PBX Environment.Device is not getting sucessfully registered. Please find below the last entries from the LogFile.Any Explanation about the meanin...