SPA525G Firmware 7.2.5 includes support for localization of the phone display for the languages indicated below, on a similar fashion as the SPA900 series IP Phones, i.e. via a XML dictionary. Following are the dictionaries currently supported for the SPA525G.
Syntax for the Dictionary parameter is similar to the SPA900 series. serv=tftp://<tftp_server_addr>/;d0=English-US;x0=spa525_EN_7_2_5.xml;d1=French;x1=spa525_FR_7_2_5.xml;
Note the following differences, specific to the SPA525G:
The Language name used for the syntax above SHOULD match the above names, i.e. English, Dutch, French, German, Italian, Norwegian, Portuguese, Spanish, Swedish. If you include a different name, the unit will download the firmware but will not load it on the screen.
d0 and x0 are reserved for english, but are optional. Do not try use d0 or x0 for any language other than English. If d0 and x0 are not included, the built in dictionary (English) will be used as reference. This means that the above example can also be written as follows: serv=tftp://<tftp_server_addr>/;d1=French;x1=spa525_FR_7_2_5.xml;
Hi everyone, i want to buy a SG550X-24F to connect some Switches. The newer ones come with a SFP+ Uplinkport but there are also some with only SFP Port. My question is, can i use 1G SFP Tranceiver in the SG550X-24F or is it really SFP+ 10G exclusive?...
Hi,I hate to beat a dead horse as there are tons of posts about this problem, but I am one step away from chunking this phone. The display is unable to do anything but show "CheckingDNS" ... despite multiple factory resets (which apparently aren't r...
Hi All, Is there a way to configure the Cisco RV routers (in particular the RV-160W) for NAT using a dynamic ISP IP? I reviewed the NAT section in the user manual for the RV-160. All I see is a how to configure NAT with a static public IP. My IS...
Good evening,My RV345P is flooding my syslog server with stuff like "sequenceId="55"] kernel[520263.051313] fp_netfilter_pre_routing: 6 callback suppressed Can someone advise me on what this means and how to prevent this warning from happ...