Cisco Community
English
Register
Register
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

Tech Tip: CUCM Business edition redundancy support

Labels:
1842
Views
0
Helpful
0
Comments
srirgopa
Beginner
‎05-11-2011 12:03 AM
edited on: ‎05-11-2011 ‎12:03 AM

Unified CMBE 6000 supports full  feature redundancy. You can configure hardware redundancy for all the  applications by deploying a secondary UCS C200 server and turning on  high availability feature supported by each one of the applications. If a  customer is migrating from MCS based Unified CMBE 5000 or Unified CM  and would like to configure redundancy only for call processing they can  do so by configuring the instance of Unified CM running on the MCS78XX  as a secondary/subscriber node.

http://docwiki.cisco.com/wiki/Cisco_Unified_Communications_Manager_Business_Edition_6000

0 Helpful
Latest Contents
RV160 Gateway Mode
Created by DavidMaris82661 on 02-26-2021 09:40 AM
0
0
0
0
We recently changed ISP's and the large increase in speed warranted an upgrade from our existing RV042 to an RV160. I started by using the settings from the RV042 as the basis for the settings in the RV160 and when I connect it to the old ISP modem, every... view more
Cisco C500 Switch Trunking fail after reboot
Created by jonathanghignoli on 02-26-2021 07:27 AM
3
0
3
0
I have a connection between a Cisco c500 and a Cisco 3560 in trunk on a vlan (vlan id 216). When one of the 2 switches is accidentally restarted following an electrical outage, the "switchport mode access" command is added to the trunk port, removing the ... view more
can I import from sf-302 to cbs-350??
Created by tommls on 02-26-2021 07:08 AM
3
0
3
0
We have an SF-302-08P switch.Can I export its configuration, then import this exported configuration into a Cisco CBS-35O-8P-2G-NA switch??How should the SF-302 config be exported?? -- exclude, encrypted, plaintext??And how should it be imported?? -- runn... view more
WAP321 - stopped working after power cut
Created by SimonJennings01340 on 02-26-2021 01:44 AM
5
0
5
0
Hello,After 5 years of perfect usage providing extended wifi coverage to my office, my WAP321 has stopped working after a power cut. Ive tried the usual reset & turning it off and on along with downloading the Cisco FindIT application to try and ... view more
CBS350 vLAN DHCP Server
Created by Grux22 on 02-25-2021 03:13 PM
3
0
3
0
Hello, I'm looking to create a DHCP server for 2 vLANs for a small business network.  I've done this several times before on older Cisco switches, but this is my first time on the Business 350 switches.  Despite what I believe is a pro... view more