cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

UC300 SIP Trunk Configuration for Telgo (Austria)

968
Views
0
Helpful
0
Comments

Tested by: Ernst Horvat, Telgo Austria

UC320W FW release: 2.1.3(0)

  • Provider: Generic SIP Provider
  • Description: telgo
  • Proxy: trunk1.at.telgo.cc
  • Registration: Checked (Client-server SIP trunk, registration required)
  • Outbound Proxy: trunk1.at.telgo.cc
  • Call Capacity: 12
  • Prefix # w/"+43" : <blank> (uses AT national numbering plan)
  • Company Name: <Phone Number international without leading 0 or +> (this will appear as the Display Name field on SIP messaging)
  • Account ID:  <As provided by the ITSP>
  • SIP domain name: <blank>
  • Authentication ID: <Same as Account ID>
  • Password: <As provided by the ITSP>
  • SRV Recorded Lookup: Uncheck
  • SRV Auto Prefix: Uncheck
  • NAT Mapping: Uncheck (ITSP provides SBC/Outbound proxy)
  • NAT Keepalive: Checked

   Systemwide parameters

  • Codec: G711a
  • Outbound FAX:  Passthrough

Known Issues: