Hi,
I have CISCO CME 2911 router with call manager express 7.1. My pstn line are connected to my FXO card.
IOS Version === c2900-universalk9-mz.SPA.150-1.M3.bin
The configuration as below.
!
application
service aa flash:app-b-acd-aa-2.1.2.3.tcl
paramspace english index 1
param number-of-hunt-grps 5
param handoff-string aa
param dial-by-extension-option 6
paramspace english language en
param max-time-vm-retry 2
param aa-pilot 7000
paramspace english location flash:
param second-greeting-time 60
param welcome-prompt en_bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 700
param service-name acd
!
service acd flash:app-b-acd-2.1.2.3.tcl
param aa-hunt4 103
param aa-hunt1 100
param aa-hunt5 104
param number-of-hunt-grps 5
param aa-hunt2 101
param queue-len 10
param queue-manager-debug 1
param aa-hunt3 102
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone AR-Custom
supervisory dualtone-detect-params 1
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
connection plar opx 7000
!
voice-port 0/0/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone AR-Custom
supervisory dualtone-detect-params 1
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
connection plar opx 7000
!
voice-port 0/0/2
supervisory disconnect dualtone mid-call
supervisory custom-cptone AR-Custom
supervisory dualtone-detect-params 1
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
connection plar opx 7000
!
voice-port 0/0/3
supervisory disconnect dualtone mid-call
supervisory custom-cptone AR-Custom
supervisory dualtone-detect-params 1
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
connection plar opx 7000
dial-peer voice 6999 pots
service aa
incoming called-number 7000
direct-inward-dial
port 0/0/0
dial-peer voice 7000 voip
destination-pattern 7000
session target ipv4:168.187.83.153
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
When I am calling from mobile to the pstn line number that connected to FXO port, Its rinning, The script are not working with welcome prompt.
it ringining.........
Any
