RV320 NAT - HTTPS not forwarding

[informatique]

hello,

Sorry for my poor english i was a french guy

i need help to set up 1-to-1 NAT on a RV320 Router.

I have a pool of public IP.

the first one was public ip of the RV320 and  just made some port redirection (https) on a webserver in my primary lan (192.168.44.0 /24)

i have create a second vlan

(192.168.252.0 /24) and assigning vlan to port 3 of the router

for isolation i have just untagged  port 3 on my vlan ... other are exclude

i have made my nat rules :

my 2nd Public IP --> 192.168.252.254

and open firewall rules :

allow all traffic from wan1 any IP sources to 192.168.252.254

but when i tried to acces my webserver (https) from outside, i'm getting the router interface web pages.

what goes wrong ?

is there other things to do ?

thanks a lot for your help

best regards

[Iliya Gatsev]

Hi, 

My name is Iliya Gatsev from Cisco Technical Support Team.

It will be good to call our support line and open a support case.

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO

[informatique]

hello

i have open a support case but no response from them.

please can someone help me ?

[informatique · Accepted solution]

no idea for what happened but now its working.
i have just deleted an old setting for port translation whos was inactivate.

[Iliya Gatsev]

Hi, 

Not a problem, glad you got it working.

Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO