We Need SG500X Switch for its VRRP Features. and also, We do have 1G Fiber on Network. So, which fiber module can i choose for SG500X switch.
It do have 4x 10GE SFP+ Ports.
Can i choose MGBLX1 for SG500X for 1 gigabit fiber connectivity?
Yes, you can choose the MGBLX1 fiber module. It is a compatible 1GB single-mode fiber module that will work with the SG500X series.
For a full list of compatable SFP/SFP+ Modules, please refer to the "Supported SFP/SFP+ Modules" section of the Sx500 Series Datasheet: http://www.cisco.com/en/US/prod/collateral/switches/ps10903/ps12128/c78-695646_data_sheet.html
Cisco Small Business Support Center
You left the fiber description out of your request, so i thought i better ask a qualifying question, so you order the appropriate SFP.
MGBLX1 is a SFP designed for running over single mode (SM) fiber.
MGBSX1 is a SPF designed for running over multimode (MM) fiber
The fiber you have onsite may have writing on the side that says, 50um or 62.um or may be orange. This cable is multimode cable
if the fiber is MM, 50um thick then you may have a range of no more than 500 meters with a p/n MGBSX1
if the fiber is 62.5um thick then you may have a range of around 220 meters with a p/n MGBSX1
The fiber may have writing on the side that says 9um, or may be yellow - This is singlemode cable
Thanks for your response. We do have Single Model fiber. Thats why earlier i have mentioned Single mode fiber Module Part Number MGBLX1.
I want to know that Is SG500X ( with 4x 10G SFP+ Slots) can support 1G single model fiber Module?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: