cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


203
Views
0
Helpful
1
Replies
Highlighted
Beginner

2960S Express Setup

I have a refurbished 2960S (48 port) that doesn't want to enter Express Setup mode.

 

I have followed the steps in the user manual for POST, then doing a reset by holding the mode button for 3+7 seconds, and then it seems to properly reset and go through POST again. I can then connect an ethernet cable to the management port and, using a web browser connect to 10.0.0.1 as directed in the manual. I can do this using both Chrome and IE with similar results. I then get the following in my browser:

browsershot.jpg

 

If I now click on Telnet I am prompted to open a Telnet session but get nothing after that.

If I click on Web Console, I get a 404 error.

Here is the diagnostic log:

diagnostic_log.jpg

Any advice for a software guy who is needing to get this switch up and running? Thanks!

Everyone's tags (2)
1 REPLY 1
Hall of Fame Community Legend

Re: 2960S Express Setup

Console into the switch and post the complete output to the command "dir".
I suspect the HTML files are either missing or in the wrong directory.