08-22-2018 06:34 AM
Folks,
I have an RV340 as an Anyconnect SSL VPN server. I can successfully connect and disconnect twice with a mobile client. However on teh third attempt to connect, I reach the server, accept the banner, but the VPN disconnects. Logs are attached.
I will appreciate any assistance that I can get is resolving this issue.
08-24-2018 05:01 AM
Hi,
Can you please verify the log on the RV340 Router, whether you are able to see any log which shows 'QueueNotEmpty : queue entries is empty'
Also please confirm the Firmware version running on the RV340 Router.
09-13-2018 11:43 AM
09-14-2018 03:41 AM
Hi,
Thank you for your reply. The mentioned problem has already been reported (for the mentioned firmware version) and there is a bug CSCvj50141 generated for the same.
Presently the workaround are as follows…
- Only known workaround is to reboot the router
- Sometimes changing port used has helped
The mentioned bug might get fixed on the future firmware release.
09-14-2018 03:43 AM
Hi,
Thank you for your reply. The mentioned problem has already been reported (for the mentioned firmware version) and there is a bug CSCvj50141 generated for the same.
Presently the workaround are as follows…
- Only known workaround is to reboot the router
- Sometimes changing port used has helped
The mentioned bug might get fixed on the future firmware release.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: