Switches - Small Business

I'm a bit behind in firmware versions on my CBS250 - I'm currently running 3.1.1.7Can I upgrade directly to the latest (3.4.0.17) or do I need to do some intermediate upgrade steps?

Hi,I am currently experiencing an issue where the switch (CBS350-16FP-2G) isn't providing POE power to devices, we recently had this issue and the switch was replaced but it seems it has happened again.So I was wondering if there is any known issues ...

If you are reading this post most likely you are looking for a solution to flush your Cisco CBS 250 / 350. The item is available for sale only only here: https://www.ebay.com/itm/386869884098

Does anyone know when these Visio stencils might be released? Making diagrams with SG model stencils is janky. The switches have been out for a while now. 

I'm about to retire an old server running Windows 2008 R2. This machine acts as a secondary DNS server for the domain. While technically I don't need two DNS servers, it is good practice to have a fall back in case the primary DNS server (i.e. the Do...

Hello Cisco Community,Starting today, I've seen this log message appearing a lot in my logs. From what I've read, it's either a duplicate MAC address or a loop in the network. We have checked for loops and we didn't find any. And this can't be a dupl...

Buen dia.Necesito configurar 2 VLANS en 1 router cisco SG350-10, con asignandoles 2 rangos de ips a las vlan, en modo GUI.Si alguien tiene informacion.

Hi There,we now have 2 of these devices in our company and both behave the same.DHCP leases will not be deleted automatically. So we are ending up full of expired leasees until no receives a new IP.Another issue is that also both switches are not ava...

Hi guys.I am newer in the community. I have 5 sg200-50 switches . By default only WEB GUI is enable to management it.I have found a trick to enable telnet :- download the configuration.txt - Edit it with notepad+- After the line "username cisco passw...

I've got two SG220-26 switches (firmware version 1.1.3.1) and both have the same problem.They randomly stop answering ping for approximately 20 -30 minutes.We are using a monitoring system (Zabbix) that pings the switches every 60 seconds. But someti...

HelloI am looking for CBS350 visio stencils and the old stencil "Cisco Small Business 200-500 Series Switches" is not satisfaying (front/back views for wiring team). Please could you tell me if the CBS visio stencil will be available soon or not?