Switches - Small Business

I'm trying to connect a server who do not accept VLAN tags to a switch. This switch has a VLAN tag that is coming from a transmitter. There are also other computers connected to this switch, and since they are configured let say to VLAN2 which is wha...

all 19 of the APs do power up but only 13 of the 19 broadcast the SSID. others are indicated as Fault in the Web Interface (please see screenshot). we've already tried to limit the power inline to 10W but we still can't make all of the APs go fully f...

Hi All,   I'm trying to configure private VLANS for the first time on an SG300-28PP. gi3 is the connection to my router which serves as the gateway for this VLAN.    I've created Private vlan 231 that maps to private vlan 23.  The config for VLAN 23 ...

I am the IT Director at our school. We have a SG300-10 that only seems to pass public, routable traffic in certain circumstances! The setup is as follows: Ports 1-4 = VLAN501, Access Mode, Untagged PVID=501Ports 5-8 = VLAN100, Access Mode, Untagged P...

Hello Guys,I have a SG300-10 and I am trying to route 2 vlans, I was using layer 2 SW's and both my Firewalls to route them and all was working but I want the SW to do it now. I'll try to explain my network as best as I can. So I have 2 L2 SW's and 1...

Dear All, We have Total 7 SG300 switches for Desktop access dual-homed to Pair of 3560-x switches for Data access in branch environment.All 7 switches have identical configuration, hardware version and were commissioned at the same time.However only ...

Hi,Currently we have switch:Model No.: SG300-52 52-PortPID VID: SRW2048-K9 V04 We wanna buy another one, which in future would replace this one, which we have. The problem is - I can't find exactly the same switch such as SRW2048-K9 V04, only similla...

We have been trying to figure this one out for a while now.    We have a core of 7 stacked switches (L3) - SG500 deployed on LAN. On our WLAN: We have 5 SG300 switches deployed.  One of five switches is configured as an L3 switch. The SG300 (L3) swit...

Hi all, i try to download network assistant 6.0 but the website say that i need more entitlements, someone have the same problem? Why i can download the 5.6 version but not 6?   Thx all

Hello, in our enviroment we use a cisco small business switches (Sx200, Sx300, Sx500, Sx250, Sx350). I wanted to try copy configuration from switch to remote TFTP server like in this manual https://community.cisco.com/t5/networking-documents/how-to-c...

I would like to restrict access to the server on port 1 to specific devices by MAC address.  I have the following config on my SG350-10: switch8f97f0#show runv2.3.5.63 / RLINUX_923_093CLI v1.0mac access-list extended Server-Accesspermit 5c:51:4f:ca:a...

Hi All, I have an SG500 switch that crashes (i.e. stops passing all traffic) at exactly two weeks after a power cycle, at the exact same time of the day, down to the minute.  A power cycle restores it immediately for 2 more weeks.  Any idea what caus...

"Minor", but irritating as it causes a bunch of NMS software to get fairly upset. ifIndex and ifDescr from one of our sg300s look like this: {49 "gi1",50 "gi2",51 "gi3",52 "gi4",53 "gi5",54 "gi6",55 "gi7",56 "gi8",57 "gi9",58 "gi10",59 "gi11",60 "gi1...