We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...
Forum Posts
(Updated September 2023 - Added Catalyst 1200 and Catalyst 1300 ) Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Catalyst 1200 & 1300 Hardware Install...
Hi! I just bought an SG 200-08 switch to split my Internet connection in two vlans where one (apartment) has 100Mb/s and the other vlan (my place) has the rest of the 500Mb/s connection and the apartment devices should not be able to see my devices a...
Hello everyone, I have a Unifi U6 Lite AP with 2 SSIDs, One SSID is my Lan and another is VLAN 20. My first SSID with LAN WAS Ok, but my another SSID with VLAN 20 Was not working (clients not getting any dhcp), My VLAN Was setuped like {Photo1.png, P...
Hello, I'm new to networking and I'm trying to set up a network switch. My task is to set a SG350-52MP PoE switch. I've learned how to do basic configuration and I have read multiple manuals and articles, my issue: i cant come up with a solution is ...
Dear All, We have a SG350-28P PoE switch and we are looking to configure Voice and Data on a single port.I have the catalyst switch configuration and its working i am looking for the SG series configuration and have watched some vidoes on youtube. It...
Anyone have any idea why the PoE Status showed OFF for all ports for my switch SG220-50P 50-Port Gigabit PoE Smart Switch? AccSW3#show power inlinePower management mode: Class limit modeLegacy device supports: enabledUnit Power Status Nominal Allocat...
Resolved! SG300-28 RADIUS login
Hi,I have some 2960s and they work like a charm. I configured RADIUS access on them and had no problems with that.Now I have two C300 (SG300-28) and I can't get them to work with my RADIUS server, I always get an "authentication failed".Here are the ...
i have a 10g sfp and i am adding SN and give me answer that is 1000basefns20431356
I am looking for specs for the CBS350-24XS which show how many copper transceivers I could use without exceeding the power or heat budget. I'd appreciate guidance on where to find this information.Thanks.
Resolved! Trusted DHCP server SG200-26P
Hello,I recently got 2 SG200-26P switches. Now I want to set a trusted DHCP server in their configuration since I don't want somebody coming into my network( Using these switches for LAN-party's) and run a DHCP server themselves. How or where in this...
Hello,I'm looking for some information on the SG200-50P Smart Switch. I can't find the IGMP Querier stetting on these switches. From the information on the product pages it looks as if it should be in Multicast -> IPv4 Multicast Configuration -> IGMP...
Hi All! I don't know if anyone has ever had this issue before, it has been happening since we started using SGs switches as layer 3 and as DHCP server.. The setup we do at our clients' homes is mainly 4-5 VLANs, intervlan routing at the layer 3 swi...
Hello forumHoping somebody can guide me as to whether or not there is somewhere I can report an issue I have discovered with stacking on the new Cisco Business 350 Series Switches (Cisco CBS350-24XS). I believe it to be a bug or that the product shee...
Resolved! Cisco Small Business
Dear Team, Please guide how to configure below type of configuration. How to set vlan under the interface after stack configuration and what will be configuration on CBS-48T switches. Please guide.
Resolved! How to get CLI from menu
When i login though telnet or ssh CLI open like a menu just you canchoose you cant write the code you want my running version is 1.0.0.27 on Switch SF300-24 Managed Switch
