Switches - Small Business

Hello there guys, I'm a newby in the Networking field so please help if you can?  I'm currently setting up a SLM2048 Swtich on my home network, it has only one computer connected to and an a active Comcast Modem. I have the Modem on Port 1 and my com...

Shortly we introduced a new Unify VoIP PBX. We generated a Voice Vlan on our SG300 and SG500 Switches (Vlan 100 tagged). Now if we put a VoIP system telephone in an unconfigured port on our switch the port configures itself to vlan 1 untagged and vla...

Hello all, A little advice please...  I recently set up Vlans and L3 switching in a small network. I spent some time tweaking the Access-lists to obtain the desired results, and finally achieved my goal. One observation I have is that when writing a...

I notice a problem with Cisco SMB switch SF300 and SG300.Here is my network diagram : net_diagramSW 1 - WS-C3560SW 2 - WS-C3560SW 3 - SMB switch SG-300On SW 1 and SW 2 i have RPVST+ on SW 3 i have RSTP.All links between switches is in trunk mode and ...

Hola a todos. Si alguien me puede colaborar le estaré inmensamente agradecido. Tengo un Switch Cisco SG300-10 administrable, lo configure con ip fija y le asigne la puerta de enlace, en los pcs que van directo al Switch no tengo problema, pero si con...

Dear Concern,                I have buys 8 Switches of Cisco Small Business SRW248G4(SF300-48) from local market at Karachi, Pakistan. I just wana conform that its Orignal or Copy, New & refurbish, below are the serial number of switches :-   1- DNI1...

Dear Concern,                I have buys 8 Switches of Cisco Small Business SRW248G4(SF300-48) from local market at Karachi, Pakistan. I just wana conform that its Orignal or Copy, New & refurbish, below are the serial number of switches :-   1- DNI1...

We have recently bought a two stack SG500 28 port switches.  Firstly I should mention that I am an experience cisco admin but only with enterprise class devices. I linked the two switches together in a stacking config as per the documentation.  I hav...

Hello Every one im writing today on this forum because I'm fed up of everyone telling me " you just need to configure this!" and its doesn't work... here is my problem: I have 20 IP CCTV camera on an install who are connected to different switches (1...

I just purchased two sg350xg-2f10 switches. They are working fine for the most part, but the configuration only appears to show 8 LAG groups. The data sheet shows " ●  Up to 32 groups ●  Up to 8 ports per group with 16 candidate ports for each (dynam...

Hi, I am trying to get VLAN information from an SG500 switch, basically the VLANs each port carry in trunk mode and the VLAN id for access ports. I found some entires for VLAN under .1.3.6.1.4.1.9.6.1.101.48 using  CISCOSB-vlan-MIB.  Basically it ex...

Hello, Could you help me to block websites like youtube and facebook on Cisco 891F router for the whole network. Thank you.